닫기

Create wq

Lab. on Chemical Redox Acceleration Technologies for Water Quality

home    Publication    Journal

Journal

Electroflotation clarifier to enhance nitrogen removal in a two-stage alternating aeration bioreactor
Year of publication 2013
Title of paper Electroflotation clarifier to enhance nitrogen removal in a two-stage alternating aeration bioreactor
Author Kangwoo Cho, Chong Min Chung, Yun Jung Kim, Michael R. Hoffmann, Tai Hak Chung*
Publication in journal Environmental Technology
Status of publication accepted
Vol 34
Link https://iahr.tandfonline.com/doi/abs/10.1080/09593330.2013.788072#.Wwt… 750회 연결


Stringent water treatment criteria and rapidly growing pollutant loads provoke the demand for retrofitting wastewater treatment plants towards a higher capacity. In this study, we assess a two stage alternating aeration (AA) bioreactor equipped with electroflotation (EF) clarifier, for nitrogen removal within a short hydraulic reTENTion time (HRT). The EF under steady solids loading required a minimum unit height and gas:solids ratio of 0.006 for efficient clarification. The separated sludge blanket was further thickened with retaining stability when the cyclic solids loading was smaller than 1.0 kg m−2. In the continuous operation of the bioreactor, the returned activated sludge concentration increased to more than 18,000 mg L−1, while the effluent suspended solids concentration was lowered below 5 mg L−1. Under influent chemical oxygen demand (COD)/total inorganic nitrogen (TIN) concentration of 300/30 mg L−1, the TIN removal efficiency was near 70% with cycle time ratios of 0.17 and 0.27. Under higher influent COD concentration of 500 mg L−1, TIN removal efficiency was found to be 73.4% at a carbon:nitrogen (C:N) ratio of 10 and even higher (80.4%) at a C:N ratio of 16.6. The increased mixed liquor suspended solids concentrations (>6000 mg L−1) under the high COD loading were efficiently maintained by using the EF clarifier. The results of this study demonstrate that an EF clarifier with a HRT of less than 1 h can support reliable nitrogen removal in the AA process that has a HRT of 6 h, even under increasing influent loadings.